Stud Walls and Partition Systems
Metal stud partitions divide space fast and finish dead flat. Trainor Plastering Ltd builds stud walls, boards and plasters them across Manchester, Salford and Trafford, for homes and commercial fit-outs.
A metal stud partition is quick, light and accurate: track and stud set out from the plans, boards fixed either side, and a skim that leaves the wall ready for paint. Doing the frames, the boarding and the plastering ourselves means the wall you get at the end is one Trade's work, not three.
We build metal stud partitions across Manchester, Salford, Stockport, Trafford, Bolton, Bury, Rochdale, Oldham and Wigan. Domestic jobs range from a single stud wall to split a large bedroom, right up to full reconfigurations. Commercially we fit out offices and units, and we also build metal ceilings, which share the same grid-and-board discipline.
Offices and units around Salford Quays and MediaCityUK get reconfigured constantly, and stud partitions are how that happens without heavy building work. Across the suburbs it is the same story in houses: a big back bedroom in Didsbury becomes two, a box room in Chorlton becomes a nursery, a loft in Withington gets a new gable wall.
Acoustic separation is often the reason for the job, especially in terraces and shared homes, and it comes from the build-up: the right board, insulation in the cavity and a full skim. We will talk you through what the wall needs to do before we quote it.
If the new wall needs to hang a TV, shelves or kitchen units, tell us and we will pack noggins in the right places before boarding.
We come out, or work from your photos and plans, and price the wall on its length, height, build-up and finish. The quote covers the frame, the boards, the insulation and the plaster, so there are no surprises between trades. It is free, written and no obligation.
For commercial fit-outs we can price from drawings and work to programme, alongside any metal ceilings and dry lining in the same scheme.
Tell us what the space needs to become and we will price the whole wall, frame to finished skim, anywhere in Greater Manchester.
07866 397026How thick is a metal stud partition?
The overall thickness is the stud width plus a board on each face, so the right answer depends on the build-up you need for sound and strength. We will recommend a thickness after seeing the space.
Can I hang a TV or shelves on a stud wall?
Yes, if it is built for it. We fit noggins and doubling behind the boards where anything heavy will be mounted, so you can fix into solid timber rather than hope.
Do you do metal ceilings as well as partitions?
Yes. Metal ceiling systems and metal stud partitions are part of the same trade, and we install both on domestic and commercial jobs across Greater Manchester.
Is metal stud better than timber stud?
Metal stud is straight, light and consistent, and it is what most commercial fit-outs use. Timber still has its place in some domestic jobs. We recommend the frame that suits the wall, not the one that suits us.
Do you work on commercial fit-outs in Manchester?
Yes, alongside domestic work. We price from drawings, build to programme, and can combine partitions, ceilings and dry lining in the same scheme.